Technical Characteristics; Connection Terminals - Comelit 20004692 Manual Tecnico

WARNING
EN
• Install the equipment by carefully following the instructions given by the manufacturer and in compliance with the standards in
force.
• All the equipment must only be used for the purpose it was designed for. Comelit Group S.p.A. declines any responsibility for
improper use of the apparatus, for any alterations made by others for any reason or for the use of non-original accessories or
materials.
• All the products comply with the requirements of Directive 2006/95/EC, as certifi ed by the CE mark they carry.
• Installation, mounting and assistance procedures for electrical devices must only be performed by specialised electricians.
• Cut off the power supply before carrying out any maintenance work.
ART. 20004692 – SIMPLEHOME FLUSH-MOUNTED MODULE WITH 2 x 2A RELAYS
Interface with 2 static 2A relays for connection to bus modules with 24 Vdc transistor outputs.
The 2A solid state relay output is suitable for the connection of low energy fl uorescent lamps, LED lamps...
Not to be used for controlling motors of fans, rolling shutters, curtains...
Power supply voltage
Max. current absorption
Max. distance from 24 Vdc OC output
Max. inrush current on 230 Vac output
Input impedance at 24 Vdc
Defusing voltage on 24 Vdc input
Inputs
Max. relay capacity
Max. output power
Indications
Terminals
Positioning
Operating temperature
Storage temperature
Relative air humidity
Weight
Dimensions

TECHNICAL CHARACTERISTICS

min. 15 Vdc, max. 30 Vdc
30 mA for each output
15 m
40A
3200 Ω
<15 Vdc
2 for connection of 24 Vdc transistor outputs
2A
460 W
2 output status indicator LEDs
removable
in fl ush-mounted boxes
0° to 50°C
-10° to +70°C
5 to 95% with no condensation
42 g (not including packaging)
41x29x9 mm
Term.
1
2
3
4
5
6

CONNECTION TERMINALS

Function
Output 1 relay
Common
Output 2 relay
Input 1 - 24 Vdc
Relay control common
Input 2 - 24 Vdc
3