Tabla de contenido
English
6. Loosen lower arm support knob to adjust lower arm support height (A1- A2). Tighten knob.
7. Head and breast thermoplastics can be attached to C- Qual™ by inserting into attachment points (See thermoplastics instruction).
8. Prior to removing C- Qual™ from couchtop, lock tilting board to lower board.
REPROCESSING
WARNING
Users of this product have an obligation and responsibility to provide the highest degree of infection control to patients, co-workers and themselves. To avoid cross-
l
contamination, follow infection control policies established by your facility.
Inspect device for damage such as cracks or breakage. If damage is evident, discontinue use and contact CIVCO for further instructions as needed.
l
1. Wipe all surfaces with common germicidal or antiseptic wipe, such as alcohol. If necessary, disinfect with a mild, non- abrasive cleanser.
2. Wipe dry with lint- free cloth or allow to air dry prior to reassembly and use.
MAINTENANCE
NOTE:
Inspect device periodically for signs of damage and general wear.
l
Inspect arm supports for damage and wear. Clean to remove grease and contaminates from arm support components.
l
STORAGE
NOTE:
Wrap device in clean soft cloth to prevent scratching. Store in cool, dry place.
l
Before C- Qual™ storage holder installation, consult your facility's manager.
l
Device should be stored on C- Qual™ storage rack.
l
I. C- Qual™ in locked position
II. C- Qual™ Storage Rack
4
C-Qual™
Tabla de contenido
