Tabla de contenido
. . . . . .
_,--.
Be sure to close the HOLD FLAP for safety
when removing the DCP.
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
2. Insert the left side of the DCP into the main
unit.
.~~
• The DCP can easily be damaged by
shocks. After removing it, be careful not to
drop it or subject it to strong shocks.
• If the FLIP DOWN PANEL is kept open, the
DCP may drop due to vibration of the car.
This results in damage to the DCP. So
close the FLIP DOWN PANEL or remove
the DCP to store into the case.
• The connector connecting the source unit
and the DCP is an extremely important
part. Be careful not to damage it by
pressing on it with fingernails,
screwdrivers, etc.
Note:
• If the DCP is dirty, wipe off the dirt with
a
soft, dry
cloth only.
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
Removing the DCP
1. Press the
[SRC]
button for 1 second or
longer to turn off the power.
2. Deeply push in
[OPEN]
button to unlock the
flip down panel.
*
If the flip down panel does not open fully,
gently open it with your hand.
[OPEN]
button
4. Close the HOLD FLAP.
3. Pull the DCP toward you and remove it.
HOLD FLAP
OXZ555MP
9
Tabla de contenido
