Electrical Safety - Black and Decker EM1 Manual Del Usuario

E N G L I S H
Do not use the appliance near flammable or
N
explosive materials.
Do not use the appliance outdoors.
N
Operate the appliance only with dry hands.
N
If the power supply cord is damaged during
N
use, disconnect the appliance from the power
supply immediately. Do not touch the power
supply cord before disconnecting from the
power supply.
Disconnect the appliance from the power
N
supply when not in use, before fitting or
removing parts and before cleaning.
Always place the appliance on a level surface
N
with adequate free space on all sides.
Allow the appliance to cool before fitting or
N
removing any parts and before cleaning.
Do not operate the pump without water in the
N
reservoir.
Safety of others
Do not allow children or any person unfamiliar
N
with these instructions to use the appliance.
Do not allow children or animals to come near
N
the work area or to touch the appliance or power
supply cord. Close supervision is necessary
when the appliance is used near children.
After use
Switch the appliance off and remove the plug
N
from the socket before leaving it unattended
and before changing, cleaning or inspecting
any parts of the appliance.
When not in use, the appliance should be
N
stored in a dry place. Children should not have
access to stored appliances.
Inspection and repairs
Before use, check the appliance for damaged
N
or defective parts. Check for breakage of parts
and any other conditions that may affect its
operation.
Do not use the appliance if any part is
N
damaged or defective.
Have any damaged or defective parts repaired
N
or replaced by an authorised repair agent.
Before use, check the power supply cord for
N
signs of damage, ageing and wear.
6
All manuals and user guides at all-guides.com
Do not use the appliance if the power supply
N
cord or mains plug is damaged or defective.
If the power supply cord or mains plug is
N
damaged or defective it must be repaired by
an authorised repair agent in order to avoid a
hazard. Do not cut the power supply cord and
do not attempt to repair it yourself.
Never attempt to remove or replace any parts
N
other than those specified in this manual.

ELECTRICAL SAFETY

Before use, check that the mains voltage
N
corresponds to the voltage on the rating plate.
Do not immerse the appliance, power
supply cord or plug in water or other
liquid.
This product must be earthed.
N
ASSEMBLY (fig. A)
Wash all the accessories in hot, soapy water.
N
Rinse and dry the accessories.
Place the drip tray (10) and the drip tray cover
N
(9) on the base of the appliance.
Place a cup on the drip tray cover (9).
N
When using the two cup filter, two cups can be
placed on the drip tray cover,
to prepare two cups of espresso at a time.
Fill the water reservoir (5) to the maximum
N
amount mark and place the reservoir in the
appliance. Close the lid (6).
Note: The reservoir can be filled whilst in
N
place, or filled separately and then fitted.
Make sure the unit is switched off before
removing or fitting the reservoir.
Fitting the filter holder to the brew head (fig. B)
Before fitting the filter holder filled with coffee,
make sure the appliance is cleaned and purged of
air as described in "Before first use".
Select the one or two cup filter and insert it
N
into the filter holder (14).
Fill the filter (16) with coffee, using the
N
measuring spoon (17). Use only coffee for
espresso machines.
Lightly tamp down the coffee with the back of
N
the measuring spoon. Remove any excess
coffee.