Procedure For Reversing The Door - Haier HDE5000AW Manual Para El Usuario E Instrucciones De Instalación

English

PROCEDURE FOR REVERSING THE DOOR

The door on your dryer can be changed from a right-side opening to a left-
side opening, if you need.
Tools required: 1. Long magnetic head
2. Power Drill
Before you reverse the door, place a soft cloth
on the work space to protect the surface of the
door.
1. Open the dryer door.
2. Using the long phillip screw driver,
remove the left one screw from the hinge
that attach the dryer door to the front
panel of the dryer. (Fig 1)
3. Using the long phillip screw driver,
remove the right 2 screws from the hinge
that attach the dryer door to the
front panel of the dryer. (Fig 2)
Note: While removing the door screws,
the screwdriver must be straight. Screws
may not come off if screw driver is at an
angle.
4. To disengage the door from the panel,
hold the door close to the hinge and lift
straight up. (There are 3 tabs in the back
of the hinge that will be disengaged).
(Fig 3)
NOTE: Be careful while removing the door. Lift
with caution or door hinge tab may break.
13
All manuals and user guides at all-guides.com
phillip screw driver
Fig 1
Fig 2
Fig 3