Product Safety And Rf Exposure For Portable Two-Way Radios; Charger Safety Instructions - Motorola XTB446 Manual Del Usuario

PRODUCT SAFETY AND RF EXPOSURE
FOR PORTABLE TWO-WAY RADIOS
Before using this product, read the
!
operating instructions for safe usage
contained in the Product Safety and RF
C a u t i o n
Exposure booklet enclosed with your
radio.
ATTENTION!
Before using this product, read the RF energy awareness
information and operating instructions in the Product Safety and
RF Exposure booklet to ensure compliance with RF energy
exposure limits.

Charger Safety Instructions

Before using the battery charger, read all instructions and
cautionary markings on:
• the battery
• the battery charger, and
• the radio using the battery.
To reduce the risk of injury, only charge the Motorola
!
approved rechargeable battery for this product.
Other types of batteries may burst, causing personal
injury and damage.
C a u t i o n
All manuals and user guides at all-guides.com
SAVE THESE INSTRUCTIONS
1. Do not expose the charger to rain or snow.
2. Do not operate or disassemble the charger if it has received
3. Never alter the AC cord or plug provided with the unit. If the
4. To reduce the risk of damage to the cord or plug, pull the
5. To reduce the risk of electric shock, unplug the charger from
6. Use of an attachment not recommended or sold by Motorola
7. Make sure the cord is located so it will not be stepped on,
8. An extension cord should not be used unless absolutely
9. The supply cord of this charger cannot be replaced. If the
a sharp blow, or has been dropped or damaged in any way.
plug will not fit the AC outlet, have the proper outlet installed
by a qualified electrician. An improper condition can result in
a risk of electric shock.
plug rather than the cord when disconnecting the charger
from the AC outlet
the AC outlet before attempting any maintenance or
cleaning.
may result in a risk of fire, electric shock, or personal injury.
tripped over, or subjected to damage or stress.
necessary. Use of an improper extension cord could result
in a risk of fire and/or electric shock. If an extension cord
must be used, make sure:
• That the pins on the plug of the extension cord are the same
number, size, and shape as those on the plug of the charger.
• That the extension cord is properly wired and in good electrical
condition, and
• That the cord size is 18 AWG (1 mm
(30 metres) and 16 AWG (1.3 mm
(45 metres).
cord is damaged please return to your place of purchase.
2
) for lengths up to 100 feet
2
) for lengths up to 150 feet
1