Cycle Guide - Kenmore 60102 Manual De Uso Y Cuidado

CYCLE GUIDE – AUTO MOISTURE SENSING™/AUTO DRY CYCLES
Not all cycles and settings are available on all models.
AUTO MOISTURE SENSING™/AUTO DRY –
the selected dryness level.
Depending on model, temperature may be selected on cycle knob or be a separate control. Choose Normal to save energy.
Items to dry:
Jeans, heavy work
clothes, towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
NOTE:
If loads do not seem as dry as you would like, select More next time you dry a similar load. If loads seem drier than you like, select Less next
time you dry a similar load.
Not all cycles and settings are available on all models.
TIMED DRY –
Will run the dryer for the specified time on the control. Depending on model, temperature may be selected on cycle
knob or be a separate control.
Items to dry: Cycle:
Any load
Timed Dry
Any load Touch Up
Rubber, plastic, heat Air Only
sensitive fabrics
If your dryer has multiple temp settings:
A High Cotton temp setting may be used for drying heavyweight items such as towels and work clothes.
A Low Delicates or Medium Casual temp setting may be used for drying medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a Air Only (no heat) setting for foam, rubber, plastic, or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.
6
Senses moisture in the load or air temperature and shuts off when the load reaches
Dry
Dryness
Temp: Level:
More
High Cotton
Normal
Less
Medium Casual More
Normal
Less
Low Delicates More
Normal
Less
CYCLE GUIDE – TIME DRY CYCLES
Dry
Temp:
Any
Any
No heat
Setting the Drying Temperature
Available
Options:
Wrinkle Guard™ omatic cycles give the best drying in the
Aut
Cycle Signal shortest time. Drying time varies based on
Dry Temp load size, and dryness setting.
Select a drying temperature based on the
Wrinkle Guard™
fabrics in your load. If you are unsure of the
Cycle Signal
temperature to select for a load, select the
Dry Temp
lower setting rather than the higher setting.
Wrinkle Guard™
Cycle Signal
Dry Temp
Available
Options:
Dry Temp Select a drying temperature based
on the fabrics in your load. If you are
unsure of the temperature to select for
a load, select the lower setting rather
than the higher setting.
N/A This is the last step in a cycle that
uses heat. The load is cooled slowly to
reduce wrinkling and make it easier to
handle. Use this cycle to smooth wear
or packing wrinkles.
Use a Air Only (no heat) setting for
Time Adjustment
foam, rubber, plastic, or heat-sensitive
fabrics.
Cycle Details:
Cycle Details: