Setups Of Restoring Factory Settings; Default Settings; Handling With The Operational Problems - Viesta Eco Pro 200 Manual Del Usuario

4.10 Setups of restoring factory settings

Default settings when machine is leaving factory:
No. Menu function setup
1 Automated washing setup
2 Pre-brewing setup
3 pre-grinder powder setup
4 Coffee temperature
5 Water hardness setup
6 Key tone setup
7 Alarm sound setup
8 Power –saving setup

5. Handling with the operational problems

No. Problem
1 The LCD show s"CHECK DUMP
CONTAINER OR DRIP TRAY"
2 The LCD show "MISSING
BREWING UNIT".
3 The brewing unit fails to be taken
out, and stuck in the machine.
4 Grinder motor work for a while,
the screen shows "add beans",
but the bean hopper has enough
bean.
5 Shortage of water while the
machine is working
6 Coffee Powder cake is wet and
unshaped
7 Due to the opening of the swing
door, the LCD will show"CLOSE
THE DOOR"
8 The display screen shows"ADD
BEANS".

Default settings

Close
Open
Close
Medium
Two
Open
Open
30 min
Handling methods
Check if the dump container and drip tray are in
the right position
Replace the brewing unit; take it out first ,then
put it back, the sound "kata" shows the
successful action in pushing the unit into its
original place.
Press the startup key, and repress the star tup
key, then the machine will have self -examina-
tion process, after this process, open the door,
and the brewing unit can be pulled out easily.
Check the coffee powder fineness. If it is too fine
, please adjust the fineness adjusting knob to an
appropriate position.
Operates as the directions on the display screen
Coffee powder volume is not enough; please
adjust the coffee powder volume knob.
Please close the swing door.
Check if the bean hopper has beans.
[ EN p. 12 ]
Version: 8.0
KEN001KVA 26.06.2017