Functional Testing - Reer WEGA Manual Del Usuario

ATTENTION:
Never try to repair the device
yourself.
NOTE:
If Baby- (Transmitter) or Parent Unit
(receiver) is not working properly or
if unexpected errors occur, we would
ask you:,
1.) First, to read the appropriate section
of the operating instructions again
carefully..
2.) Then please try to find the error with
the aid of the following error table.
3.) If the error cannot be remedied, we
would askyou please to contact your
retailer or to call our hotline at:
+49 (0)700 /73 374 624
All manuals and user guides at all-guides.com

Functional Testing

Please test the function before first use (e.g. with the help of a television set). Adjust the settings (volume of
the parent unit) and make sure that the optimal transmission is taking place. Please note that distance and
thick walls can negatively influence the transmission quality.
Problem
No reception in the
parent unit
On the monitor
only a black / white
image can be seen
The camera does not
transmit
ATTENTION:
Please keep receipt and article number.
.
Possible guarantee claims or claims from a guarantee agreement
must be exclusively dealt with by the retailer.
possible malfunction source What can be done?
* The camera does not trans- * Connect power supply unit
mit (Power supply units to the camera
are not connected or the * Set Vox-function-switch
camera is set to Vox to CAMERA
Function) * Select the correct channel
* Receiver is set to the on the parent unit
wrong channel * Switch the transmitter on
* The transmitter
is switched off
* The camera is set to infra- * Switch on lighting in the room
red night vision to be monitored
* The camera is switched off * switch camera on
* Power supply unit is not * Connect power supply unit
connected * Set Vox-Functions-Switch to
*Vox-Function is switched on CAMERA
(Stand-by-Mode)
page 19