Worx Professional WU362 Manual Del Usuario página 9

19 Accessories and metal parts can become very hot.
20 Hold tool by insulated gripping surfaces when performing an
operation where the cutting tool may contact hidden wiring. Contact
with a 'live' wire will also make exposed metal parts of the tool 'live'
and shock the operator.
Warning: If a small amount of electrolyte should leak from
the battery pack under extremes of temperature or after heavy
use, then wash off immediately from your skin and hands using
clean water. For eye contact, rinse thoroughly with clean water and
seek medical treatment immediately.
Warnings for the charger:
1. Before using the tool, read the instruction book carefully.
2. Charger is for indoor use only. Do not expose to rain or water.
3. Do not charge non-rechargeable batteries.
4. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
All manuals and user guides at all-guides.com
7
Symbols
To reduce the risk of injury, user must read instruction
manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Indoor use only
Do not expose to rain or water
Do not burn
Do not dispose of batteries. Return exhausted batteries to
your local collection or recycling point