Sony ST-D777ES Manual De Instrucciones página 6

Getting Started
Connect the supplied DAB wire aerial or an DAB
outdoor aerial (not supplied) to the DAB terminal on
the back of this unit.
DAB wire aerial
to DAB outdoor aerial
Connecting a ground wire
If you connect an outdoor aerial, be sure to connect a
earth lead (not supplied) to the AM ANTENNA
terminal with "U" indication (in addition to the AM
loop aerial) for lightning protection.
Amplifier hookups
Connect the tuner to an amplifier. Be sure to turn off
both components before connection. For the specific
location of the terminals, see the illustration below.
What cables will I need?
• Audio cord (supplied) (1)
Connect the white plugs to the white (L) jacks and the
red plugs to the red (R) jacks. Insert the plugs
completely into the jacks; incomplete connections may
cause noise.
ST-D777ES
ANALOG OUT
R
GB
6
ANTENNA
DAB
FM AM
75Ω COAXIAL
ANTENNA
DAB
FM AM
75Ω COAXIAL
ANALOG OUT
Amplifier
TUNER IN
R L
L
MD/DAT Hookups
This section describes how to connect the tuner to a
DAT deck or MD recorder for digital-to-digital
recording. With this connection, you can obtain the
highest possible sound quality when recording DAB
digital broadcasts, even if you use the analog outputs
for listening purposes. For specific locations of the
jacks, see the illustration below.
DAB DIGITAL OUT
What cables will I need?
• Digital optical cable (not supplied) (1)
• Digital coaxial cable (not supplied) (1)
Digital Optical
ST-D777ES
DAB DIGITAL OUT
COAXIAL OPTICAL
Digital Coaxial
ST-D777ES
DAB DIGITAL OUT
COAXIAL OPTICAL
Notes
• When you use MD recorders which do not support to
input the 48kHz digital audio signal, you cannot play or
record the digital signals from the DIGITAL OUT jacks.
• The OPTICAL jack has retractable cover. Insert the plug
into the jack.
DAT/MD
DIGITAL IN
OPTICAL
DAT/MD
DIGITAL IN
COAXIAL