English • Owner´s manual
PTO (Fig. 10)
ATTENTION
- Before leaving the machine, make sure you have removed the ignition key if installed.
- Make sure that the implements are resting on the ground and that the walking tractor is parked both
legally and as safely as possible.
The walking tractor is equipped with a PTO (L),
(Fig. 10) designed and built to international
16 UNI 221 standards (with clockwise rotation
for the NORMAL WALKING TRACTOR version
and anticlockwise rotation for the REVERSING
WALKING TRACTOR version) and located at the
rear of the gearbox housing.
The PTO shaft can be driven in one of two ways:
- Via the gearbox - SYNCHRONIZED MODE.
- Directly from the engine - INDEPENDENT MODE.
The speeds can be selected by means of the PTO mode selector control lever (2), (Fig. 11) which has
three positions:
NORMAL WALKING TRACTOR version
REVERSING WALKING TRACTOR version WITH FRONTAL IMPLEMENT
ATTENTION
- Start the engine with the PTO lever in neutral position.
Speed SYNCHRONIZED with all gears
PTO DISENGAGED (neutral)
CLOCKWISE speed independent from gearbox
Independent ANTI-TIME speed compared to the
gearbox
PTO power OFF (neutral)
SYNCHRONIZED speed with all gears of the
gearbox
Fig. 10 - PTO and
tow hook.
55