2.10 Completion Of Work - ATH-Heinl Four Lift 65 Manual Del Usuario

2.10 Completion of Work

Before commissioning, check all fastening screws, electrical, pneumatic and hydraulic
lines and, if necessary, tighten these. Warning: in some cases, this must be checked at
regular intervals and tightened if necessary (note in the instructions).
Lift configuration
- Check that all buttons are working. When the Lower button is pressed, check
that all catches are unlocked.
Synchronisation setting:
Raise the lift to a height of
approx. 600 mm.
Check that the guide rails are level (using a spirit level)
for both setting options specified above.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
All manuals and user guides at all-guides.com
Manufacturer ATH-Heinl GmbH & CO.KG
- 26 -
Catch setting (for axle measurement):
"Park" the lift in the first catch.