Installation Options - Cata G20 Manual Del Usuario

The dimensions of the hob and the installation opening are shown in the illustration.
Insertion and fixing
Before inserting the hob in the installation
opening, place the special gasket around the
bottom edge of the hob.
It is important to fix this gasket evenly,
without gaps or overlapping, to prevent liquid
from seeping underneath
7) Remove the pan stands and the burner
caps and turn the hob upside down, taking
care not to damage the ignition plugs and
the thermocouples.
8) Place the gasket around the bottom edge
of the hob as shown in the illustration on
9) Place the hob in the installation opening
and push it down so that the hob is resting
firmly on the cabinet, as show in the
illustration. The side springs will hold it in

Installation options

On base cabinet with door
When constructing the cabinet, suitable precautions must be
taken to prevent contact with the casing of the hob, which
becomes very hot during operation. The recommended method
for overcoming this problem is illustrated in fig.1
The panel underneath the hob must be easily removable to allow
the hob to be locked
the hob.
the right.
place.
in position and released in case of servicing
work