General Cleaning; Routine Maintenance - Cata G20 Manual Del Usuario

Wash enameled parts with
Wash the flame caps and burner caps often with boiling water and detergent, taking
The hob pan stands can also be washed in a dishwasher
For stubborn dirt, use ordinary non-abrasive detergents or specific commercial
products. We strongly advise you not to use scouring pads. Steel wool or acids for
Clean the hob regularly with a soft cloth wet with lukewarm water and a little liquid
- soaped scouring pads not suitable for non-stick utensils;
If the hob gets very dirty, use specific commercial products.
Automatic burner ignition is provided (when installed) by a ceramic "plug" and a
metal electrode (B in fig.1). Periodically clean these parts of the hob thoroughly. In
addition, to avoid ignition difficulties, check that the cavities in the burner are not
To remove deposits from the burner cavities,
remove the cap and separate the two parts
(see diagram on the right). After cleaning,
put the two parts back together and return
them correctly to their position. After washing,
replace the hob pan stands, checking that they
are correctly positioned.
Have the condition and efficiency of the gas pipe and the pressure regulator (if

General cleaning

lukewarm water and detergent: do not use abrasive
products which might damage them.
care to remove all deposits
cleaning.
detergent. Do not use the following products:
- household detergents or bleaches;
- steel wool scouring pads;
- stain removers for baths or sinks.
Ignition plug
obstructed.

Routine maintenance

Hob