Panasonic VDR-D310PL Instrucciones De Funcionamiento página 131

All manuals and user guides at all-guides.com
LSQT1150.book 131 ページ ２００７年１月１９日 金曜日 午前９時２７分
Problem
≥ You inserted an incompatible disc.
When
≥ If there are multiple drives, a drive other than this unit may be
DVD-MovieAlbumSE is
started, the [Mount
Information] dialog box
appears.
≥ If an error message appears even after a compatible disc is
≥ If there are multiple drives, a drive other than this unit may be
An image that should
have been recorded does
not appear when
DVD-MovieAlbumSE is
started.
DVD-RW (Video format) ≥ DVD-MovieAlbumSE does not support playback or data read of
or DVD-R cannot be
played back on
DVD-MovieAlbumSE.
≥ The DISC EJECT lever does not work after the unit is
The DISC EJECT lever
does not work when the
unit is connected to the
≥ After files are exported from DVD-MovieAlbumSE, a
computer.
≥ (Windows XP only) Deleting the unit name from the Device
Cannot write to DVD-
1) Select [start] # ([Settings] #) [Control Panel] # ([Performance
RAM.
Cannot format a disc with 2) Click the [Hardware] tab, then click [Device Manager].
the DVD-RAM Driver. 3) Right click [MATSHITA DVD-RAM LMXK1987 USB Device]
4) When erasing is complete, reboot the computer. The computer
When the USB cable is
disconnected, an error ≥ To disconnect the USB cable safely, double-click the
message will appear on
the computer.
Check points
# A disc other than a DVD-RAM or a DVD-RW (VR format) is
loaded in the drive: DVD-MovieAlbumSE cannot be used for
media other than DVD-RAM or DVD-RW (VR format).
selected.
# Click the [Preference] button in the dialog box, click the
[Device setting] tab to choose the drive where the disc is loaded
in the [Drive Select] column, and then click [OK].
inserted, packet writing software may be installed in your
computer. Uninstall the packet writing software.
selected.
# Click the [Preference] button at top right of DVD-MovieAlbumSE
screen, click the [Device setting] tab to choose the drive where
the disc is loaded in the [Drive Select] column, and then click
[OK].
DVD-RW (Video format) or DVD-R.
# Use optional-user provided DVD-Video playback software to play
back DVD-RW (Video format) or DVD-R on the computer.
connected to the computer.
# Use Windows Explorer to right-click the drive icon and execute
[Eject]. Or use the software's eject button to eject the disc.
confirmation message is displayed about ejecting the disc.
Select [Eject the disc being used.].
Manager and then connecting the unit and the computer again
can improve this. Follow the steps below. Before proceeding,
be sure to remove the disc from the unit.
and Maintenance] #) [System].
displayed at [DVD/CD-ROM drives] and then select [Uninstall].
will automatically recognize the unit again.
in the task tray and follow the instructions on the screen.
Others
icon
131
LSQT1150