Deleting Readings From The Blood Pressure Monitor - IEM Tel-O-Graph GSM Manual De Instrucciones

Memory
8.2 Deleting readings from the blood pressure
monitor
To clear the memory on your blood pressure monitor,
proceed as follows:
Fig. 11: Delete measurements
1) Press and hold the
pressure monitor for about 3 seconds.
 The display shows [IP] (see Fig. 11A).
Note
The display automatically shows each menu
entry for 3 seconds. The display order is:
➔
Mobile network transmission (IP)
➔
Infra-red transmission (IR)
➔
Delete measurements (c lr)
30
button on the blood
Note
The menu options "Mobile network transmission
(IP)" and "Infra-red Transmission (IR)"
provided for servicing purposes and you do not
need to use it.
2) Wait until [c lr] flashes on the display (Fig. 11 C).
3) Press the
 You will hear an acoustic signal and the display
will be shown [c lr] permanently.
4) Press and hold the
3 seconds.
 The acoustic signal sounds 3 times and the
display shows [M00] (see Fig. 11/C).
The measurements are deleted. The device returns to
standby mode and
(see Fig. 6).
are
button.
button for more than
displays the start screen