urmet domus BiBsus II ED Manual De Instrucciones página 9

Assign calling code
to button P1
(to be repeated
for all door units).
Program apartment
stations
(to be repeated
on any door unit
and all apartment
stations)
(*) All data will be lost if the dip switches are moved also after ending the programming procedure.
DS1072-028
Press the programming button
on the door unit
Press button P1
Press the programming button
Press the programming button
Press calling buttons of the door
phones to be programmed
and note the sequence down
Wait for 30 seconds
Go to the apartments in the booking
sequence, hold the door opener button
pressed and pick up the door
phone handset.
The LED will light up
and a confirmation tone
will be heard
The door unit will beep
The LED will go out
and a confirmation tone
will be heard.
The LED will light up
and a confirmation
tone will be heard
A confirmation beep
will be heard each
time the button is pressed
The LED will start blinking
and a confirmation
tone will be heard
The apartment station
will beep twice and the LED
will blink to confirm
programming.
The door unit LED
will go out
after programming
9