urmet domus BiBsus II ED Manual De Instrucciones página 13

Programming
procedure
(to be repeated
for each door unit)
Program
apartment
stations
(to be repeated
on any door unit
and all apartment
stations)
(*) All data will be lost if the dip switches are moved also after ending the programming procedure.
DS1072-028
Program
PICK-UP TIME
Program
MINIMUM CONVERSATION TIME
(busy time)
Program
LOCK OPERATION TIME
Program
CODE-BUTTON ASSOCIATION
Press calling buttons
of the door phones to be programmed
and note the sequence down.
DO NOT PRESS the stair case
light button (P1 by default) if a button
has been reserved for this purpose
Wait for 30 seconds
Go to the apartments
in the booking sequence,
hold the door opener button pressed
and pick up the door phone handset
The pick-up time
is the maximum time
from start of a call for the user
to answer the door phone
G 1 ↵
10 sec
G 2 ↵
20 sec
G 3 ↵
30 sec
G 4 ↵
40 sec
The minimum conversation time
during which the conversation
cannot be interrupted
by other users
O 1 ↵
10 sec
O 2 ↵
20 sec
O 3 ↵
30 sec
O 4 ↵
40 sec
The relay controlling
the door lock can be managed
in pulse mode (00)
or stabile mode (from 1 to 30 s).
0 ↵
pulse
D 0
y ↵
(xy=seconds) D x
Each apartment station
must be combined to a code
and calling button
as follows:
m ↵
C xyzw P n
xyzw = user code
nm = button number
A confirmation beep
will be heard each time
the button is pressed
The LED will start
blinking and a confirmation
tone will be heard
The apartment station
will beep twice
and the LED will blink
to confirm programming
13