urmet domus BiBsus II ED Manual De Instrucciones página 8

ENGLISH
This guide provides additional help for programming 2
The following programming methods are recommended according to the complexity of the system and the
required functions:
A. Systems with up to 3 main calling stations (without secondary systems):
1. Without staircase light function on button P1 (see diagram A1 page 8).
2. With staircase light function on button P1 (see diagram A2 page 10).
B. Systems with more than 3 main calling stations or main and secondary calling stations (see
diagram B page 12).
Diagram A1
Programming procedure for systems with up to 3 main calling stations (no secondary stations) without stair
lights function on button P1.
Assign station
number
Program door lock
activation time
(to be repeated
for all door units)
8
SIMPLIFIED PROGRAMMING
PROCEDURE
with dip-switch and led
Set the main station number (1, 2 or 3)
by means of the dip switches (
on all door units
Press the programming button
on the door unit
Hold the "Hall" button pressed
(PA; GND terminals) for the time
to be programmed
Press the programming button
nd
edition Bibus digitiser door units.
Dip switch position
)
*
Main station number
Not defined
(for programming with
external keypad)
1 2
Station 1
1 2
Station 2
1 2
Station 3
1 2
The LED will light up and
a confirmation tone
will be heard
The door unit will acquire
the time and will
beep when the button
is released
The LED will go out
and a confirmation
tone will be heard
DS1072-028