urmet domus BiBsus II ED Manual De Instrucciones página 11

Program apartment
stations
(to be repeated
on any door unit
and all apartment
stations)
(*) All data will be lost if the dip switches are moved also after ending the programming procedure.
(**) If you make a mistake, quit programming, hold the programming button pressed for longer than 3
seconds. The door unit default setting will appear.
DS1072-028
Press the programming button
on any door unit
Press all calling buttons for the door
phones to be programmed and note
the sequence down. DO NOT PRESS
BUTTON P1 (staircase lights) (
Wait for 30 seconds
Go to the apartments in the booking
sequence, hold the door
opener button pressed and pick up
the door phone handset
The LED will light up
and a confirmation tone
will be heard
A confirmation beep
will be heard each time
the button is pressed
)
**
The LED will start blinking
and a confirmation tone
will be heard
The apartment station
will beep twice and the LED
will blink to confirm
programming.
The door unit LED
will go out
after programming
11