Integrating The System Into The Network - Dell PowerEdge 1855 Guía De Configuración

Input
Table 1-2 describes the fwupdate subcommand options.
Table 1-2. fwupdate Subcommand Options
Option Description
-a The IP Address option specifies the IP address of the TFTP server.
-d The -d option specifies the path and filename of the firmware update file on the TFTP server.
-D After the update is complete, reset all firmware configuration parameters to the default
values. For more information, see "racresetcfg" in the Dell Remote Access Controller/Modular
Chassis User's Guide.
Output
Status of the TFTP upload can only be seen from a serial connection to the DRAC/MC since the
DRAC/MC Telnet and web server services are shut down during the upload. This is to ensure that
the card does not receive interrupts that might impact the firmware update.
NOTE:
You can download a TFTP server from http:\\solarwinds.net. For information on installing
and configuring the SolarWinds TFTP server, refer to the SolarWinds website.

Integrating the System Into the Network

Your system is essentially a self-contained network. Table 1-3 and Table 1-4 show the mapping
of the internal and external ports.
Table 1-3. Internal Network Port Mapping
Module Port
Server module 1
LOM 1
LOM 2
Server module 2
LOM 1
LOM 2
Server module 3
LOM 1
LOM 2
Server module 4
LOM 1
LOM 2
All manuals and user guides at all-guides.com
I/O Bay 1 I/O Bay 2
1/1
1/1
1/2
1/2
1/3
1/3
1/4
1/4
General System Configuration
17