Switching Off; Storing The Machine - Stihl HSA 65 Manual De Instrucciones

1
N Push the switch lever (1) against
the loop handle and hold it there.
Squeeze the trigger switch (2) and
hold it in that position. The motor
runs only when the switch lever and
trigger switch are operated at the
same time.
Trigger switch
Motor speed is controlled by the trigger
switch. Pull the trigger switch to
accelerate the motor.
HSA 65, HSA 85

Switching Off

1
N Release the switch lever (1) or the
trigger switch (2).
Always remove the battery from the
power tool during work breaks and after
finishing work.
Removing the Battery
2
1
N
Press in both locking tabs (1) at the
same time to unlock the battery.
N Take the battery (2) out of the
housing.
When the machine is not in use, shut it
off so that it does not endanger others.
Secure it against unauthorized use.

Storing the Machine

N
Remove the battery.
N Cover the battery compartment if
necessary – to protect it from dust
and dirt.
N Clean the cutting blades, check
condition and spray with STIHL
resin solvent.
N Fit the blade scabbard.
N Thoroughly clean the machine,
especially the cooling air inlets.
N
Store the machine in a dry, locked
location – the blade scabbard can
be mounted to the wall for this
purpose – out of the reach of
children and other unauthorized
persons.
Storing the battery
1
N Take the battery out of the power
tool or the charger.
N
Store in a dry, locked location. Keep
it out of the reach of children and
other unauthorized persons and
protected from contamination.
N Do not store spare batteries unused
– use in rotation.
To ensure maximum battery life:
N Store at a temperature between
+ 10°C and + 20°C.
N Store with a charge of about 30%.
English
41