Troubleshooting - Stihl HSA 65 Manual De Instrucciones

English

Troubleshooting

Always remove the battery before carrying out any work on the power tool.
Condition
Machine does not run when switched on
Power tool cuts out during operation
48
Cause
No electrical contact between power tool
and battery
Battery discharged
(1 light emitting diode on battery flashes
green)
Battery too hot / too cold
(1 light emitting diode on battery lights
up red)
Battery faulty
(4 light emitting diodes on battery flash
red)
Power tool too warm
(3 light emitting diodes on battery light
up red)
Power tool faulty
(3 light emitting diodes on battery flash
red)
Moisture in power tool and/or battery
Battery or power tool circuitry too warm Take the battery out of the power tool;
Electrical malfunction
Remedy
Remove the battery and refit it properly
Charge the battery
Allow battery to cool down / warm up
1)
Install new battery
Allow power tool to cool down
Have checked by servicing dealer
Allow power tool/battery to dry
allow the battery and power tool to cool
down
Remove the battery and refit it properly
HSA 65, HSA 85
1)