PRIXTON KITCHEN GOURMET KG200 Manual De Instrucciones página 19

7.3 Inserting and removing the blade assembly
The blender jug may never be used without the blade assembly
because the assembly constitutes the seal for the bottom of the jug.
Warning! Remember that the blades of the assembly are extremely
sharp. Never touch them with your bare hands to avoid cutting yourself.
Here is how to remove the blade assembly:
1. Lay the blender jug on its side.
2. Turn the unlock lever anti-clockwise which attached with the blade
assembly bracket on the underside of the blender jug so that it is
pointing at the open padlock symbol.
3. Carefully remove the blade assembly.
Here is how to insert the blade assembly:
4. Lay the blender jug on its side.
5. Insert the blade assembly from the inside. Note that the two
protrusions on the base of the blade assembly have to be inserted into
the two holes in the base of the blender jug.
Caution!
• Make sure that the rubber seal of the blade assembly is correctly
seated, otherwise the contents are liable to leak out.
6. To lock the blade assembly, Turn the unlock lever clockwise which
attached with the blade assembly bracket on the underside of the
blender jug so that it is pointing at the closed padlock symbol.
Note: Cut large pieces into smaller ones with an edge length of about 3
– 4 cm. Pieces larger than this may get jammed in the blades.
19