Protecting The Environment - DeWalt DWB800 Manual De Instrucciones

All manuals and user guides at all-guides.com
Your D WALT power tool has been designed to operate over a
E
long period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and regular
cleaning.
Replacing Carbon Brushes (fi g. 4)
Use a screwdriver to remove the brush holder cap.
Take out the worn carbon brush, insert the new one and secure the
brush hold cap.
WARNING: Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark.
FIG. 4
Lubrication
Your power tool requires no additional lubrication.
Cleaning
Regularly clean the ventilation slots in your tool using a soft brush or
dry cloth.
Regularly clean the motor housing using a damp cloth. Do not use
any abrasive or solvent-based cleaner.
WARNING: Blow dirt and dust out of the main housing with dry air
as often as dirt is seen collecting in and around the air vents. Wear
approved eye protection and approved dust mask when performing
this procedure.
WARNING: Never use solvents or other harsh chemicals for
cleaning the non-metallic parts of the tool. These chemicals may
weaken the materials used in these parts. Use a cloth dampened only
with water and mild soap. Never let any liquid get inside the tool;
never immerse any part of the tool into a liquid.
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by authorized service centers or other qualified service
personnel, always using identical replacement parts.
Accessories
WARNING: Since accessories, other than those offered by
D WALT, have not been tested with this product, use of such
E
accessories with this tool could be hazardous. To reduce the risk of
injury, only D WALT, recommended accessories should be used with
E
this product.
Recommended accessories for use with your tool are available at extra
cost from your local dealer or authorized service center.

Protecting the Environment

Separate collection. This product must not be disposed of
with normal household waste.
Should you find one day that your D
replacement, or if it is of no further use to you, do not dispose of it
with household waste.
22
WALT product needs
E