R.b.c. Installation; Ups System - R.b.c. Internal Battery Installation - Tripp-Lite RBC58-3US Manual Del Propietário

R.B.C. Installation

UPS System – R.B.C. Internal Battery Installation
1
When installing the new replacement batteries, make
sure the red and black DC connector end is facing
towards the rear of the UPS and the communication port
is facing toward the front of the UPS. Starting with the
right side replacement battery pack tray, insert the battery
pack tray, making sure it protrudes slightly from the UPS.
Repeat for the left replacement battery pack tray.
Note: For better connector access, attach the cables before
the battery packs are fully inserted into the UPS.
2
Reconnect the battery communication cables to the UPS
and push the battery pack trays completely into the UPS.
3 Close the battery door and secure by tightening the
captive screws.
4 Reattach the front bezel to the UPS and secure with the
screws removed in step 1 of the Battery Removal section.
1
2
1
2
3
4
5