Safety Instructions - YATO YT-85300 Manual Del Usuario

All manuals and user guides at all-guides.com
GB

SAFETY INSTRUCTIONS

CAUTION! Read all of the following instructions. Failure to do so may result in electric shock,
fi re, or personal injury.
FOLLOW THE INSTRUCTIONS BELOW
Instructions for use
The device is only intended for pumping clean water. The device is not designed for pumping
liquids other than water, such as: oils, petrol, solvents, acids, bases, organic substances,
fats, sewage, faecal matter, as well as water contaminated with such substances. The de-
vice must be kept under supervision at all times during operation. Do not allow the pump to
operate dry. This will cause the pump to overheat, which can damage it and cause a fi re or
an electrocution.
The pump must not be used in the following ways: for pumping drinking water; for continuous
operation, for example, for supplying a fountain with water; for pumping water at a tempera-
ture higher than that specifi ed in the technical data table.
It is forbidden to repair, disassemble or modify the device on one's own. All repairs to the
product must be carried out by an authorised service centre.
Clean the pump only with a clean water jet.
The device is not intended for use by children under at least 8 years of age, by those with
reduced physical and/or mental abilities, and by those without any experience or knowledge
in operating the device, unless they will be supervised or instructed to use the device safely,
in a manner ensuring that the risks involved are understood. Children should not play with
the device. Unattended children should not be allowed to clean and perform maintenance
of the device.
Recommendations concerning the transport and installation of the device
Warning! The pump must not be connected to the power supply during submersion. The
pump power cord must be unplugged from the socket.
The pump sucks the water through the openings in the pump housing. The pump in the water
should be placed in a vertical position. Recommendations for distances and dimensions are
given in fi gure (II).
It is forbidden to immerse the pump in water bodies with people present.
The dimensions of the well must meet the requirements of this manual.
The submerged pump must be positioned vertically. Tipping or tilting the pump leads to mal-
functions, reduces performance, and it can also result in damage to the pump.
It is forbidden to drill any holes in the device, as well as making any other modifi cations of the
device that are not described in the manual.
Move the product by grasping the housing. Do not move the device by pulling on the power cord.
Recommendations for connecting the appliance to the power supply
Warning! The pump shall be supplied by a residual current device (RCD) with a rated diff er-
O R I G I N A L I N S T R U C T I O N S
11