Samoa 561100 Guía De Servicio Técnico Y Recambio página 2

EN
DESCRIPTION
Electric gear pump composed by a single-phase (Models 561100,
561110, 561200, 561210, 561300 and 561310) or three-phase
(Models 561101, 561201 and 561301) Asynchronous motor, flange-
mounted directly to a rotary gear pump. The pump is selfsuctioning
and equipped with a by-pass valve.
INSTALLATION
ELECTRICAL CONNECTION
These pumps are distributed with a short cable for testing purpose.
To connect the electric motor to a line, remove the top cover and
disconnect the short cable. Connect the line according to Fig. 2.
Do always employ installation cables etc. according to the electrical
information given under "Technical Data"-Electrical information.
DRUM CONNECTION
Pos Part No. Description
A 950 303 Shut-off valve
B 362 301 Outlet hose
C 945 670 Connection adaptor
D 561 110 Gear pump
E 367 000 Suction assembly
DRUM CONNECTION
Pos Part No. Description
A 950 303 Shut-off valve
B 362 301 Outlet hose
C 945 670 Connection adaptor
D 561 110 Gear pump
E 945 552 Connection adaptor
F 362 400 Suction hose
G 950 306 Shut-off valve
H 945 555 Adaptor
I 945 565 Adaptor
2
856 801 R. 04/19
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
THREE PHASE
1500 mm
A
A
Models 561110, 561210 and 561310 also includes a pressure switch
with a non-return valve integrated that automatically turns on and off
the electric motor.
This pump is designed to pump oil with viscosity from 50 to 1500 cSt.
The use of the pump with other fluids can cause explosion or
oxidation inside the pump.
MECHANICAL INSTALLATION
These electric pumps can be installed in the following ways: On a
horizontal base and on the wall with the pump upwards or
downwards.
See figure 3 and 4 for typical installations with all the recommended
accessories for the pump to operate correctly.
SINGLE PHASE
B C D
1500 mm
E
B
C D
E
F
Fig. 2
1060 mm
H
I
G
Fig. 3
Fig. 4