Maintenance And Care - Flex ALC 3/1-Basic Manual Del Usuario

ALC3-1.book Seite 16 Donnerstag, 25. Juni 2015 1:00 13
FLEX ALC 3/1–Basic
– If the device is brought from a very cold
to a warmer environment or vice versa,
you should allow the device to acclimatise
before using it.
– If using adapters and tripods, ensure that
the device is screwed on tightly.
The most important operating steps are
explained at the end of these instructions
on the illustrated pages.
See from page 166.
Inserting/changing batteries ................... 166
Switching the device on and off ............. 168
Selecting the operating mode ................ 170
Switching over ambient mode ................ 172
Handling the laser .................................. 174
Testing the horizontal beam .................. 176
Testing the vertical beam ....................... 180
Checking precision
It is recommended to check the device
regularly to ensure that it is always precise.
If the precision deviates from the permitted
tolerance range, the device must be taken
to a customer service workshop authorised
by the manufacturer.
All manuals and user guides at all-guides.com
Have the device adjusted by authorised
technicians only.
The steps required to check the precision
are explained at the end of these instructions
on the illustrated pages. See from page 176.

Maintenance and care

Observe the following instructions:
– Handle the device with care and protect
it from impacts, vibrations, extreme
temperatures.
– When the device is not in use, keep
it in the protective pouch.
– If not used for a prolonged period, take
the batteries out of the device.
– Replace used batteries immediately.
– Clean the lens with a soft, dry cloth only.
– Have the device repaired by qualified
technicians and with original spare parts
only. This ensures that the safety of the
device is maintained.