Maintenance And Care; Disposal Information; Ce Declaration Of Conformity - Flex ALC 514 Instrucciones De Funcionamiento

Line laser

Maintenance and care

Cleaning
If the power tool is damp after use, wipe the
power tool and accessories with a dry, soft
cloth.
Do not use solvents or abrasive cleaning
agents to remove dirt. Use a clean cloth
moistened with water and a mild detergent.
Remove dust, etc. from the discharge
windows for the laser beams (9, 10) with
a soft cloth.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
Accessories
Spare-part/Accessory
Receiver RC 2
Bracket for RC 2 receiver
Clamping column
Elevator tripod, medium-sized
(0.65–2.00 m)
Elevator tripod, large
(0.90–2.85 m)

Disposal information

In accordance with the European Directive
2002/96/EG on Waste Electrical and
Electronic Equipment and transposition into
national law used electric power tools must
be collected separately and recycled in an
environmentally friendly manner.
Please ask your dealer about disposal
options!

CE Declaration of Conformity

We hereby declare that this product
corresponds with the following standards
Order
or normative documents:
no.
EN 50082-1, EN 55022 in accordance
329.487
with the regulations stipulated in the
directive
329.991
89/336/EWG.
312.096
312.118
312.126
FLEX-Elektrowerkzeuge GmbH
Bahnhofstraße 15
D-71711 Steinheim/Murr
EU countries only
Do not throw electric power tools into
the household waste!
Note!
05
Rühle Severin
19