Maintenance And Care; Disposal Information - Flex ALC 2/1–Basic Instrucciones De Funcionamiento Originales

ALC2-1.book Seite 16 Donnerstag, 25. Juni 2015 10:28 10
FLEX ALC 2/1–Basic
– If using adapters and tripods, ensure that the
device is screwed on tightly.
The most important operating steps are
explained at the end of these instructions on the
illustrated pages.
See from page 156.
Inserting/changing batteries ...................... 156
Switching the device on and off ................ 158
Selecting the operating mode ................... 160
Switching over ambient mode ................... 162
Handling the laser ...................................... 164
Testing the horizontal beam ...................... 166
Testing the vertical beam .......................... 170
Checking precision
It is recommended to check the device regularly
to ensure that it is always precise.
If the precision deviates from the permitted
tolerance range, the device must be taken to
a customer service workshop authorised by
the manufacturer.
Have the device adjusted by authorised
technicians only.
The steps required to check the precision are
explained at the end of these instructions on the
illustrated pages. See from page 166.
16

Maintenance and care

Observe the following instructions:
– Handle the device with care and protect it from
impacts, vibrations, extreme temperatures.
– When the device is not in use, keep it in the
protective pouch.
– If not used for a prolonged period, take the
batteries out of the device.
– Replace used batteries immediately.
– Clean the lens with a soft, dry cloth only.
– Have the device repaired by qualified
technicians and with original spare parts only.
This ensures that the safety of the device is
maintained.

Disposal information

EU countries only:
Do not throw electric power tools into the
household waste!
In accordance with the European Directive
2012/19/EC on Waste Electrical and Electronic
Equipment and transposition into national law
used electric power tools must be collected
separately and recycled in an environmentally
friendly manner.