Silvercrest SKMP 1300 D3 Instrucciones Breves página 16

The device is designed for the following maximum continuous oper-
ating times, depending on use:
- max. 10 minutes of stirring/kneading with the mixing tools,
- max. 3 minutes of mixing in the blender jug,
- max. 30 seconds at maximum capacity (stirring/kneading and
mixing simultaneously at maximum capacity).
Afterwards the device must remain switched off until it has cooled
down to room temperature.
The device must be disconnected from the mains if left unattended
and prior to assembly, disassembly or cleaning.
Please remember that the blades of the blade assembly are very
sharp:
- Never touch the blades with your bare hands in order to avoid
cuts.
- When washing manually, the water should be sufficiently clear
so that you can see the blade assembly easily to avoid injuries
caused by the very sharp blades.
- When emptying the blender jug, ensure not to touch the blades
of the blade assembly.
- When removing and inserting the blade assembly ensure not to
touch the blades.
- When removing and fitting the seal for the blade assembly, be
careful not to injure yourself on the blades.
Prior to the replacement of accessories or attachments which move
when in operation, the device must be switched off and disconnect-
ed from the mains.
Please take note of the chapter on cleaning.
Packing materials are not children's
toys. Children should not be allowed to
play with the plastic bags. There is a
risk of suffocation.
Electrical devices can represent a dan-
ger to pets and livestock. In addition,
animals can also cause damage to the
device. For this reason you should keep
animals away from electrical devices at
all times.
14 GB
The device must never be operated in
the vicinity of a bathtub, a shower, a
filled washbasin or similar items.
The base unit, the power cable and the
mains plug must not be immersed in wa-
ter or other liquids.
Protect the base unit against moisture,
water drips and splashes.
If liquid should enter the base unit, pull
out the mains plug immediately. Have
the device checked before reusing.