Mounting Anti-Tip Bracket - Thermador PROFESSIONALTMPRO HARMONY Manual De Instrucciones

Mounting Anti-Tip Bracket

The floor mounted bracket shall be installed as follows:
1. Place bracket on floor in position shown in Figure 7.
• Bracket may be used in either corner of the
installation area.
2. Secure to floor and wall stud using the (4) 1½" (38 mm)
Phillips head screws provided.
3. Later, when the unit is installed, the adjustable leg will
slide under the bracket, as shown in Figure 8.
4. If the range is moved to a new location, the Anti-Tip
Device must be removed and reinstalled.
English 12
All manuals and user guides at all-guides.com
Range Side
30" Left or Right 2¼" (57 mm )
36" Left or Right 2⅝" (67 mm )
48" 2½" (64 mm)
Left or Right
C L
x
Distance f o
C L
x
Top View of Bracket
x
Figure 7: Placement of Anti-Tip Bracket
Figure 8: Anti-Tip Bracket