Switching Off The Device; Cleaning - Steinbach Poolrunner Battery+ Manual Del Usuario

1. Hold the device by the handle
slowly into the water until all the air has
escaped.
2. Carefully lower the device to the bottom on the
nylon cord of the floating handle.
Make sure that the device lands on the bottom
of the pool on its underside and that cleaning
can start without obstruction towards the center
of the pool.
The status indicator
The device is in the pool and starts cleaning with a
time delay.

Switching off the device

Proceed as follows to switch off the device:
1. Lift the device out of the pool and switch it off.
2. Clean the filter unit and the device.
Stopping cleaning
The device stops cleaning automatically as soon as the rechargeable battery is almost discharged. The
status indicator is lit red while the device moves to the pool wall.
12
Lifting the device out of the pool
1. Slowly pull the device to the surface by the floating handle
reach the handle .
10
2. Slowly lift the device out of the water by the handle
After 10 to 15 seconds, most of the water that has collected in the housing has drained back into
the pool.
3. Set the rotary switch
The status indicator
4. Set down the device next to the pool.
The device is lifted out of the pool.
Clean the device after each use to ensure continued trouble-free operation.

Cleaning

Only clean the device with a standard bathroom cleaner, clear tap water and a lint-free cloth. Aggressive
cleaning agents can damage the device. Dry the product with a lint-free cloth.
and lower it
10
blinks blue.
12
to OFF.
8
blinks red once and the device switches itself off.
12
10
and the nylon cord until you can
6
and hold it above the water surface.
10
25