Switching Off The Device - Steinbach Poolrunner Manual Original

2. Connect the plug of the floating
cable in the right position to the
1
control unit
5
connection together.
3. Attach the control unit
of at least A=3.5 m to the pool with the
safety rope
7
pulled into the water.
4. Connect the power plug to a grounded
socket.
The control unit is connected.
Starting cleaning
1. Press the ON/OFF button
The device starts moving. The indicator
of the last selected cleaning cycle starts to
blink.
To change the cleaning cycle, press the CYCLE button
It is normal that the device knocks against the pool wall. You can adjust the
speed of the device with the two nozzles, see section "Basic settings".
Cleaning stops automatically at the end of the set cleaning cycle. All indicators

Switching off the device

Proceed as follows to switch off the device:
and screw the
at a distance
5
so that it cannot be
.
12
11
12
7 5
13
10
10
5
1
5
A
11
12
.
11
blink.
10
41