Cleaning The Pool - Steinbach Poolrunner Battery+ Manual Del Usuario

Check the following before each use:
- Is there visible damage on the device?
- Is there visible damage on the control elements?
- Do all individual parts function?
- Are the accessories in perfect condition?
- Are all cables in perfect condition?
Do not start up a damaged device or damaged accessories. Have them checked by the manufacturer or
its customer service or a qualified service technician.

Cleaning the pool

Observe the following before cleaning your pool:
- Remove any cover or foil from the pool.
- Remove obstacles (such as a ladder) from the pool.
- Switch off the filter system at least one hour before the start of cleaning so that particles in the
water can settle on the floor.
Proceed as follows to clean your pool:
1. Insert the filter unit.
2. Place the device in the pool and switch it on.
Inserting the filter unit
6
3
4
1. Insert the filter unit
3
2. Push the top part
2
The filter unit is inserted.
Placing the device in the pool and starting cleaning
8
1. Attach the protective cap
2. Set the rotary switch
The status indicator
24
into the bottom part .
4
onto the bottom part until it has snapped into place on both sides.
4
1
11
to the charging plug
1
to ON.
8
is lit blue. The device is switched on and ready for operation.
12
7
2
4
9
8
12
.
11