Handling With A Transport Device (Optional Suspension Eye With Chain Box); Bringing The Operator Handle Into The Parking Position - probst SPEEDY VS-140/200 Instrucciones De Uso

3. Press the lock (8.2) and carefully pull the control lev-
er (8).
 The load is released.

7.10.2 Handling with a Transport Device (Optional Suspension Eye with Chain Box)

WARNING
Risk of load falling when removing the load securing chain
Risk of crushing.
Do not reach underneath the load when removing the load securing chain.
1. Carefully lower the load until it is just above the floor (approx. 20 to 30 cm).
2. Detach the load securing chain (11) and stow it in the chain case (11.1).
3. Set down the load fully.
4. Ensure that the load can not slide or tip over.

7.11 Bringing the Operator Handle into the Parking Position

Bring the operator handle into parking position by moving the socket pins.
1. Pull out both socket pins (5.1).
52700015 / 52700016 / 52700017 / 52700018 / 52700019 / 52700020
Operation
31 / 41