7.9.1 Manual Handling
The lifting device must be lifted by two operators using two operator handles.
CAUTION
Slippery surface or obstacles
Risk of injury due to slipping or tripping
Before handling, ensure that the operators cannot slip or trip.
1. Position the lifting device over the load's center of gravity.
2. Carefully lower the lifting device onto the load.
Suction is applied to the load.
3. Ensure that the entire area of the suction plate(s) is touching the load.
4. Before lifting, ensure that the load is free and not stuck, tilted or caught.
5. Once the gauge shows the minimum vacuum (-0,2 bar), carefully lift the load.
7.9.2 Handling with a Transport Device (Optional Suspension Eye with Chain Box)
WARNING
Risk of load falling when attaching the load securing chain
Risk of crushing.
Do not reach underneath the load when attaching the load securing chain.
WARNING
Traveling quickly over uneven surfaces
Severe injury due to falling loads.
Only travel at walking speed when the load is lifted.
Avoid shocks or jerking the unit during transport.
CAUTION
Risk of injury due to collision!
Walk behind the lifting device in the direction of travel while maintaining the prescribed safe distanc-
es.
1. Once the gauge shows the minimum vacuum (-0,2
bar), carefully lift the load (if using, operate the lifting
52700015 / 52700016 / 52700017 / 52700018 / 52700019 / 52700020
Operation
29 / 41