Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Fundamental Safety Instructions
2.6 Workplace Requirements
The following requirements must be fulfilled to ensure a safe workplace.
•
The operator is obligated to perform a risk assessment for the environmental conditions at the installation location.
•
The type plate and warning signs must be legible.
•
The operator must have a clear view of the whole working area, the workplace must be adequately lit and free of
glare, and the area around the workplace must be clean and clear.
2.7 Personnel Qualifications
Unqualified personnel cannot recognize dangers and are therefore exposed to higher risks!
The operating company must ensure the following points:
•
The personnel must be commissioned for the activities described in these operating instructions.
•
The staff must be at least 18 years of age and physically and mentally capable.
•
The product may only be operated by persons who have undergone appropriate training.
•
Personnel must receive regular safety briefings (frequency as per country-specific regulations).
•
Work on electrical equipment must be carried out only by qualified electrical specialists.
•
Installation, maintenance, and repairs must be carried only out by specialists from Probst GmbH or by persons who
can prove that they have undergone appropriate training at Probst.
The following target groups are addressed in these operating instructions:
•
Persons trained in operating and cleaning the product.
•
Mechanical and electrical specialists who are responsible for installing, troubleshooting and maintaining the prod-
uct.
The company operating the crane system must comply with country-specific regulations regarding the age, ability and
training of the personnel.
Valid for Germany:
A qualified employee is defined as an employee who has received technical training and has the knowledge and experi-
ence – including knowledge of applicable regulations – necessary to enable him or her to recognize possible dangers and
implement the appropriate safety measures while performing tasks. Qualified personnel must observe the pertinent in-
dustry-specific rules and regulations.
2.8 Personal Protective Equipment
To avoid injury, always use appropriate protective equipment that is suitable for the situation. The protective equipment
must meet the following standards:
•
Protective work shoes in safety class S1 or higher
•
Sturdy work gloves in safety category 2133 or higher
•
Industrial helmet
•
Ear protection class L or higher
•
Eye protection class F
•
Hair net
•
Closely fitting clothing
2.9 Safety Features
The lifting device has the following safety features:
•
Gauge: shows the current pressure in the vacuum reservoir.
•
Lock on the control lever (8.2) release load: Prevents the load from being unintentionally released.
•
Option: Load securing chain
Before each start of operations, ensure that the safety features are in perfect condition ((> See ch. Inspecting safety
features)).
12 / 41
52700015 / 52700016 / 52700017 / 52700018 / 52700019 / 52700020
Capítulos
Tabla de contenido
Solución de problemas
