properly working. Any tool that cannot
be controlled with the switch is danger-
ous and must be repaired.
• Store idle equipment out of the reach of
children and other untrained persons.
Equipment is dangerous in the hands of
untrained users.
• Maintain the visual inspection tool with
care. Properly maintained tools are less
likely to cause injury.
• If unit is dropped check for breakage
of parts, and any other conditions that
may affect the tool's operation. If dam-
aged, have the tool serviced before using.
Many accidents are caused by poorly main-
tained tools.
• Use only accessories that are recom-
mended by the manufacturer for your
tool. Accessories that may be suitable for
one tool may become hazardous when
used on another tool.
• Dry your hands before turning the unit
ON or OFF and before replacing bat-
teries.
• Protect against excessive heat. The
product should be situated away from heat
sources such as radiators, heat registers,
stoves or other products (including ampli-
fiers) that produce heat. Do not use the
unit near moving machinery or areas where
the temperature will exceed 113°F.
Service
• Tool service must be performed only
by qualified repair personnel. Service
or maintenance performed by unqualified
repair personnel could result in injury.
• When servicing a tool, use only identical
replacement parts. Follow instructions
in the Maintenance Section of this man-
ual. Use of unauthorized parts or failure to
follow maintenance instructions may create
a risk of electrical shock or injury.
• Do not attempt to take any pieces of
this unit apart unless directed to by
this manual.
• Follow instructions for changing ac-
cessories. Accidents are caused by poorly
maintained equipment.
• Provide proper cleaning. Do not use ace-
tone to clean the unit. Instead, use alcohol.
All manuals and user guides at all-guides.com
SeeSnake
• Conduct a safety check. Upon comple-
• Stop using the unit if it starts smoking
• Remove the batteries and refer servic-
If you have any questions regarding the ser-
vice or repair of this machine, call or write to:
Specific Safety
Information
Read this operator's manual carefully be-
fore using the SeeSnake micro Inspection
Camera. Failure to understand and follow
the contents of this manual may result in
electrical shock, fire and/or severe per-
sonal injury.
Call the Ridge Tool Company, Technical
Service Department at (800) 519-3456 if
you have any questions.
FCC Statement
This device complies with Part 15 of the
FCC Rules. Operation is subject to the fol-
lowing two conditions:
1. This device may not cause harmful inter-
Ridge Tool Company
®
micro
™
Inspection Camera
Gently clean the LCD with a dry cloth.
Remove batteries before cleaning.
tion of any service or repair of this product,
ask the service technician to perform safety
checks to determine that the product is in
proper operating condition.
or emitting noxious fumes.
ing to qualified service personnel under
any of the following conditions:
• If liquid has been spilled or objects have
fallen into product;
• If product does not operate normally by
following the operating instructions;
• If the product has been dropped or dam-
aged in any way;
• When the product exhibits a distinct
change in performance.
Ridge Tool Company
Technical Service Department
400 Clark Street
Elyria, Ohio 44035-6001
Tel: (800) 519-3456
E-mail: [email protected]
On the Web: www.ridgid.com
WARNING
ference.
3
Capítulos
