SeeSnake
®
micro
General Safety
Information
WARNING! Read and understand all in-
structions. Failure to follow all
instructions listed below may
result in electric shock, fire
and/or serious personal injury.
SAVE THESE INSTRUCTIONS!
Work Area Safety
• Keep your work area clean and well lit.
Cluttered benches and dark areas may
cause accidents.
• Do not operate electrical devices or vi-
sual inspection tool in explosive at-
mospheres, such as in the presence of
flammable liquids, gases, or heavy dust.
Electrical devices or visual inspection tools
create sparks which may ignite the dust or
fumes.
• Do not use the visual inspection tool
around corrosive chemicals. Exposure to
corrosive, oily environments can ruin the
plastic covering on the imager head and
ruin the picture quality.
• Keep bystanders, children, and visitors
away while operating visual inspection
tool. Do not let visitors contact the unit.
Personal Safety
• Stay alert, watch what you are doing
and use common sense. Do not use vi-
sual inspection tool while tired or under
the influence of drugs, alcohol, or med-
ications. A moment of inattention while op-
erating tools may result in serious per-
sonal injury.
• Do not overreach. Keep proper footing
and balance at all times. Proper footing
and balance enables better control of the
tool in unexpected situations.
• Use safety equipment. Always wear eye
protection. Dust mask, non-skid safety
shoes, hard hat, or hearing protection must
be used for appropriate conditions.
• Use proper accessories. Do not place
this product on any unstable cart or sur-
face. The product may fall causing seri-
ous injury to a person or serious damage
to the product.
• Prevent object and liquid entry. Never
2
All manuals and user guides at all-guides.com
™
Inspection Camera
• Do not use this device for personal or
• The unit is not shock-resistant. Do not
Battery Precautions
• Remove the batteries when cleaning
• Remove the batteries before storing
• When necessary, REPLACE ALL FOUR
• Use only the size and type of battery
• Be sure to install the battery with the
• This visual inspection tool is not de-
• Properly dispose of the battery. Ex-
SeeSnake
Camera Use and Care
• Use visual inspection tool only as di-
• Do not immerse the handheld display
• Do not use the camera if condensation
• Do not use tool if ON/OFF switch is not
Ridge Tool Company
spill liquid of any kind on the video dis-
play unit. Liquid increases the risk of elec-
trical shock and damage to the product.
medical use/inspection in any way.
use it as a hammer or drop it.
the unit.
the unit for a long time.
BATTERIES in this unit with new ones.
specified.
correct polarity as indicated in the bat-
tery compartment.
signed to be used with rechargeable
batteries.
posure to high temperatures can cause
the battery to explode, so do not dis-
pose of in a fire. Place tape over the ter-
minals to prevent direct contact with other
objects. Some countries have regulations
concerning battery disposal. Please fol-
low all applicable regulations.
®
micro™ Inspection
rected. Do not operate the SeeSnake
micro Inspection Camera unless the own-
er's manual has been read and proper
training has been completed.
unit in water. Store in a dry place. Such
measures reduce the risk of electric shock
and damage. The imager head and the
cable are water resistant when the unit is
fully assembled, but the video display unit
is not.
forms inside the lens. Let the water evap-
orate before using again.
Capítulos
