General Description; Extent Of The Delivery; Overview; Functional Description - Parkside PHD 100 E2 Traducción Del Manual De Instrucción Original

GB MT

General Description

Extent of the Delivery

Unpack the pressure washer and verify the
contents:
- Pressure washer
- Gun
- High-pressure hose
- Jet lance
- High-pressure nozzle
- Adjustable flat-jet nozzle
- Cleaning agent container with nozzle
- Accessories holder
- Nozzle cleaning pin
- Translation of the original instructions
for use
The diagram of the most impor-
tant functional elements can be
found on the foldout sides.

Overview

1 High-pressure connection on the
A
gun side
2 High-pressure connection on the
washer side
3 High-pressure connection
4 Carrying handle
5 ON / OFF switch
6 Accessories holder
7 Nozzle cleaning pin
8 Power supply cable
9 Water connection with sieve in-
sert (not visible)
10 Gun
11 Jet lance
12 Adjustable flat-jet nozzle
13 High-pressure nozzle
14 Cleaning agent container with
nozzle
42
All manuals and user guides at all-guides.com
D
15 Locking lever
F
16 Bolts

Functional description

The pressure washer is to be used for
washing with a high-pressure water jet. A
detergent can be added if this is required.
For the functions of the operating elements
please refer to the subsequent description.
Ensure that the safety instructions are al-
ways observed!

Technical data

Pressure Washer ......... PHD 100 E2
Mains connection ............. 230 V~, 50 Hz
Power consumption ....................1450 W
Mains cable .....................................5 m
Weight (incl. all parts) ...................5.7 kg
Safety class ......................................
Degree of protection ......................... IPX5
Inflow temperature (T in max) ............40°C
Inflow pressure (p in max) .. 0.8 MPa (8 bar)
Operating pressure (p) ...... 7 MPa (70 bar)
Max. operating pressure
(p max) ....................... 10 MPa (100 bar)
Pumping rate, water (Q)............... 5 l/min
Max. pumping rate, water
(Q max) .................................. 6.6 l/min
Acoustic pressure level
(L ) ..................81.8 dB(A); K
PA
Sound power level (L
measured ......... 94.2 dB (A); K
guaranteed ........................... 98 dB (A)
Vibration (a ) ....... 0.7 m/s
h
The operating conditions during measuring
and the procedures used for measuring in
accordance with EN 60335-2-79:2009.
=3.5 dB
PA
)
WA
=3.5 dB
wA
; K=0.15 m/s
2
II
2