AEG MRC 4136 Instrucciones De Servicio página 44

English
44
WARNING:
Do not expose the batteries to high temperatures or direct sunlight. Never throw batter-
ies into the fire. There is a danger of explosion!
Power supply
• Insert the grid plug into a properly installed three prong socket.
• Make sure the grid voltage corresponds to the figures on the rating plate.
• If you have not inserted a backup battery, the stored clock time will be lost as soon as
the power supply is interrupted.
Radio station tuning
1. Move the function switch (2) to the ON position.
2. Set the band selection switch (9) to FM or AM, depending on the frequency band you
want to listen to.
3. Turn the tuning control in order to tune in to a station.
4. If reception is too weak, change the position of the dipole antenna in order to improve
the reception.
5. An antenna is integrated in the device for the reception of the AM stations. The device
can be directed towards the transmitter by turning and changing its position. In this
frequency band, programs are only broadcast in mono.
Volume
The desired volume can be sent using the VOLUME regulator (15).
Setting of the Clock (24 h)
Hours: Simultaneously press the TIME button (8) and the HOUR button (3).
Minutes: Simultaneously press the TIME button (8) and the MIN button (4).
Switch-off
The device is switched off if the function switch (2) is in the "OFF" position.
VHF = FM, Medium Wave = AM (Mono)