Auto Function - Sony STR-DE535 Manual De Instrucciones

Location of Parts and Basic Amplifier Operations
!£ The following buttons operate the built-in tuner.
For details, see "Receiving Broadcasts" starting
from page 15.
AM button
Selects the AM band.
FM button
Selects the FM band.
FM MODE button
If "STEREO" flashes in the display and the FM
stereo reception is poor, press this button. You will
not have the stereo effect but the sound is
improved.
MEMORY button
Press to memorize a preset station.
!¢ The following buttons operate the built-in tuner.
For details, see "Receiving Broadcasts" starting
from page 15. Note that these buttons are operable
only when the tuner is selected.
Numeric buttons (1 to 0)
Inputs the numeric value.
SHIFT button
Selects a memory page for preset stations.
DIRECT button
Press to enter a station's frequency directly.
!∞ MENU buttons ( / )
After pressing the SUR, NAME, BASS/TREBLE or
SET UP button, use these buttons to make specific
settings (see pages 19 and 21).
!§ +/– buttons
After pressing MENU buttons, use these buttons to
make specific settings (see pages 19 and 21).
14 US
@¡ !£ !ª!∞
!¢
!¶ SET UP button
!• Press the following buttons to name preset stations
!ª SUR button
@º BASS/TREBLE button
@¡ DIMMER button
!¶
@º !§ !•
Press this button once, and use MENU </> buttons
to select any of the following indications. The
selected indication appears in the display and you
will be able to make various settings using the
cursor buttons.
When you've
You can
displayed
CTR MODE Select any one of the four center
modes (page 10)
REAR GAIN
Increase the range of rear speakers
by 5 dB (page 11)

AUTO FUNCTION*

Specify whether or not Sony
components connected via Control
A1 II cables will turn on or off when
selected using the function buttons.
(page 23)
2WAY SETUP* Turn on or off response to remote
signals sent from the 2 way remote.
(page 23)
* STR-DE535 only.
or program sources. For details, see "Indexing
Preset Stations and Program Sources" on page 21.
NAME button
Press to enter a name for preset stations and
program sources (except 5.1 CH/DVD).
ENTER button
Press to store the names.
Press this button to adjust sound parameters (see
page 19).
Press this button to adjust the tone (see page 19).
Press this button to set the display at any of four
levels of brightness.