GE IM-4 Manual Del Usuario página 27

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

INSTALL THE ICEMAKER FILL CUP
5
Install the icemaker fill cup (side-mounted) (18)
into the icemaker as shown.
6
REMOVE PLUG COVER
Remove the electric plug cover
from the side wall of the freezer
compartment. Insert a standard
screwdriver blade into the slot in
the cover and twist the screwdriver,
opening the slot. The cover will
pop off. Discard this cover.
7
POWER CORD ADAPTER
There are two power cord adapters included with the
kit; be sure to use the one specified in the Parts List on
page 7. Plug the female end of the power cord adapter
(21) onto the male terminals on the icemaker power
cord. When connecting the adapter to the power cord,
make sure the seal is in place between the connectors.
Secure the power cord adapter to the icemaker by
putting it into the hook at the back of the icemaker
and attaching it to the icemaker with a wire tie (24).
Hook
PLUG IN THE ICEMAKER
8
Place the icemaker on its
side as shown. Insert the
icemaker power cord plug
(A) into the socket on the
side wall, making sure the
prongs and holes are
matched. Press the plug
firmly into the socket.
All manuals and user guides at all-guides.com
Installation Instructions
18
Seal
Wire tie
Hook
A
27
MOUNT THE ICEMAKER
9
• Lift the icemaker so the fill tube extension (10)
fits in the fill cup opening (C). Hang the icemaker
on the two mounting screws (A).
Make sure:
• The power cord is still firmly in the socket.
• The fill tube extension (10) is still in the fill cup
opening. (Check the rear of the refrigerator to
make sure the fill tube has not been pushed out of
the back of the refrigerator.)
• The icemaker mounting screws are located in the
uppermost position of the mounting slots.
THEN TIGHTEN THE ICEMAKER MOUNTING
SCREWS SECURELY.
10
INSTALL THE ICE BUCKET
Put the ice bucket (11)
in place under the
icemaker.
Make sure the icemaker
power switch is set to
OFF .
11
ATTACH WARRANTY LABEL
A label (9) is provided with this kit to record the
date of installation for warranty purposes. Apply it
to the back of the refrigerator.
12
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
10
A
C
11
Tabla de contenido
loading

Tabla de contenido