GE IM-4 Manual Del Usuario página 19

6 POWER CORD ADAPTER
There are two power cord adapters included with the
kit; be sure to use the one specified in the Parts List on
page 7. Plug the female end of the power cord adapter
(21) onto the male terminals on the icemaker power
cord. When connecting the adapter to the power cord,
make sure the seal is in place between the connectors.
Secure the power cord adapter to the icemaker by
putting it into the hook at the back of the icemaker
and attaching it to the icemaker with a wire tie (24).
Hook
INSTALL THE ICEMAKER FILL CUP
7
Install the icemaker fill cup (side-mounted) (18) into
the icemaker as shown.
PLUG IN THE ICEMAKER
8
Hold the icemaker in the freezer compartment as
shown. Insert the icemaker power cord plug (D)
into the socket, making sure the prongs and holes
are matched. Press the plug firmly into the socket.
All manuals and user guides at all-guides.com
Installation Instructions
Seal
Wire tie
Hook
18
D
MOUNT ICEMAKER
9
• Lift the icemaker so the fill tube extension (10) fits
in the fill cup opening (C). Hang the icemaker on
the two mounting screws (A).
Make sure:
• The power cord is still firmly in the socket.
• The fill tube extension (10) is still in the fill cup
opening. (Check the rear of the refrigerator to
make sure the fill tube has not been pushed out of
the back of the refrigerator.)
• The icemaker mounting screws are located in the
uppermost position of the mounting slots.
THEN TIGHTEN THE ICEMAKER MOUNTING
SCREWS SECURELY.
10
INSTALL THE ICE BUCKET
Put the ice bucket (11)
directly under the
icemaker (to the left and
all the way to the rear of
the shelf under the
icemaker).
Make sure the icemaker
power switch is set to OFF .
11
ATTACH WARRANTY LABEL
A label (9) is provided with this kit to record the
date of installation for warranty purposes. Apply it
to the back of the refrigerator.
12
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
19
10
A
C
11