Dremel 3D40 Traducción De Las Instrucciones Originales página 373

ake
!
PLATE MAY BREAK AND RESULT IN PERSONAL
INJURY.
!
HOLDER. CONTACT WITH TEMPERED GLASS PLATE
EDGE MAY RESULT IN PERSONAL INJURY.
!
PLATFORM IS COVERED WITH DREMEL SPECIFIED
BUILD TAPE. USE OF IMPROPER BUILD TAPE MAY
RESULT IN EQUIPMENT DAMAGE AND POOR
OBJECT BUILD QUALITY.
1. If build platform is installed, remove by pinching the
2. Remove adhesive liner from Build Tape and place
r tip, tap
nt load
te 3. Install the build platform using the build platform
t without
efully
le nose
TO
R TIP
UDER TIP
All manuals and user guides at all-guides.com
PREPARING BUILD PLATFORM
DO NOT DROP THE BUILD
WARNING
PLATFORM. TEMPERED GLASS
DO NOT REMOVE TEMPERED
WARNING
GLASS PLATE FROM PLASTIC
BEFORE EVERY BUILD MAKE
WARNING
SURE THAT THE BUILD
clip located at the front of the build platform and
lifting the build platform off the base, figure 3.
Build Tape over Build Platform. For best results,
apply Build Tape at center of Build Platform first
and smooth outward to remove any air bubbles,
figure 4.
clips.
FIG. 3
LIFT
PRESS
Build Platform
373
FIG. 4
Build Tape