Saving Energy; Connecting The Cooling Device - Mobicool MCF 32 Instrucciones De Uso

MCF32, MCF40, MRF40, MCF60
6.2

Saving energy

 Choose a well ventilated location which is protected from direct sunlight.
 Allow warm food to cool down first before placing it in the cooling device
to keep cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooling device open for longer than necessary.
 If the cooler has a basket: For optimal energy consumption, position the
basket according to its position on delivery.
 On a regularly basis, make sure the lid seal still fits properly.
6.3

Connecting the cooling device

The cooling device can be operated with DC or AC voltage.
A
NOTICE! Damage hazard
Disconnect the cooling device and other consumer units from the
vehicle battery before you connect the vehicle battery to a quick
charging device.
Overvoltage can damage the electronics of the cooling device.
For safety reasons the cooling device is equipped with an electronic system
to prevent the polarity reversal. This protects the cooling device against short-
circuiting when connecting to a battery.
1. Plug the DC connection cable into the DC socket and connect it to a DC
power socket.
2. Plug the AC connection cable into the AC voltage socket and connect it to
an AC mains.
3. Close the covers of the sockets not in use to prevent accidentally touch-
ing the sockets. This also prevents dust, water and dirt from entering the
socket.
EN
Operation
13