Cosatto TO & FRO NITTY GRITTY Manual Del Usuario página 8

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

27 - removing the seat cover for cleaning
Secure attachment of the seat cover is critical to the safety performance of your
pushchair.
Removing and re-fitting involves a series of fasteners as per instruction below – please follow this
information carefully.
Tips:
Having the pushchair semi-folded will release tension in the seat cover and make the fabric
sections easier to remove
When passing the buckle through the plastic slots, keep the curve of the buckle in line with the
curve of the tubing and ease through the slot. If this is tight, use a blunt edge e.g. a coin or
broad screwdriver blade to help.
Behind the seat unfasten the fabric fasteners around the chassis tubes (a)
Unzip the top of the seat backrest and remove the three panels from inside (b).
Unzip the front of the fabric backrest and remove the three panels from inside (c).
Unclip the seat straps by folding the buckle flat and pushing it through the slot in the mounting
block (d).
Unfasten the fabric fastener under the seat (e).
Slide the seat cover off the calf support legs (f).
Slide the seat cover off the backrest arms (g).
Reverse these steps to refit.
Please note that the middle panel for the fabric backrest must be inserted in the orientation as
shown (h).
28 - folding the pushchair
Note: Before folding ensure the backrest is in the most upright position. Always
remove the raincover and fold the hood completely back.
To fold your pushchair pull the handles (a) and at the same time pull down on the secondary lock (b).
Keeping the secondary lock pressed down, push the handles forward until the pushchair is folded
in half. Continue until the pushchair is folded in half and the autocatch engages.
Note: Take care not to damage the stand mechanism when folding. Pressing
down too hard on the pushchair can bend the stand arms (c).
Check the autocatch is securely engaged before lifting the pushchair.
29 - using the pushchair stand
The stand automatically unfolds when the pushchair is closed.
Note: To avoid injury ensure that your child is kept away when the pushchair is
used in free-standing mode.
Note: Any additional load attached to the pushchair will affect the stability of
the pushchair.
All manuals and user guides at all-guides.com
Tabla de contenido
loading

Tabla de contenido